Isi Artikel Utama

Abstrak

The construction of a building must of course be planned in accordance with the needs,
which the building must have the criteria of safe, comfortable, economical, beautiful and in
accordance with the designation. Intan Husada Hospital Building Kab. Garut inpatient section was
built to meet the needs of the community, especially District Tarogong Kidul generally Garut regency
in the inpatient care service. Building RSU Intan Husada Garut built 4 floors with most use of
reinforced concrete structures. Floor plates are set 25 Mpa (f'c) and 400 Mpa (fy) concrete. For
structural parts in general the columns and beams are fixed with 25 Mpa concrete and 400 Mpa (fy)
steel grade. For the foundation itself set by using foot plate foundation. Planning of reinforced
concrete structure refers to Indonesian National Standard (SNI) SNI 03-2847-2002 on Procedure of
Planning of Concrete Structure for Building Building. Structural Analysis with recognized software
tools. The result of structure analysis in the form of moment, normal and shear is used to plot elements
of structure. From structural analysis that is done obtained comparison of calculation result of
structural analysis with attached. Column analysis results with longitudinal reinforcement 19D22
D10-180 while the longitudinal tu-straw 20D25 stirring D10-100. Beams of analysis results with
longitudinal reinforcement 2D13 and 9 D22 stirring D10-200 while the longitudinal reinforcing
battles 19D22 stirring D10-100. Sloof beam analysis with longitudinal reinforcement 4D22 D8-250
while mounted longitudinal 6D22 stirring D10-100.

Rincian Artikel

Cara Mengutip
[1]
Eko Walujodjati dan Andreansyah Wiguna, “Analisis StrukturRumah Sakit Umum Intan Husada – Garut Bagian Rawat Inap”, Jurnal Konstruksi, vol. 15, no. 1, hlm. 75–86, Okt 2017.

References

    Peraturan Beton Bertulang Indonesia SK-SNI 1971, Jakarta, Indonesia.
    Buku Struktur Beton bertulang, Istimawan Dipohusodo.
    Buku Grafik dan Tabel Perhitungan Beton Bertulang W.C. Vis dan Gideon Kusuma.
    Departemen Pekerjaan Umum (DPU), Pedoman Perencanaan Pembebanan Untuk Rumah dan
    Gedung, SK SNI-1727-1989, Jakarta, Indonesia.
    Departemen Pekerjaan Umum (DPU). 1991. SK SNI T-15-1991-03 Tata Cara Perhitungan
    Struktur Beton Untuk Bangunan Gedung.
    Badan Standarisasi Nasional (BSN), Standar Perencanaan Ketahanan Gempa Untuk Struktur
    Gedung, SK SNI 03-1726-2002, Jakarta, Indonesia.
    AISC LRFD - 2005, (2005), Load & Resistance Factor Design Spesification For Structural
    Steel Buildings, American Institute Of Steel Construction, Inc. Chicago, USA.
    ACI 318 – 2008, (2008), Building Code Requirements For Structural Concrete, Portland Cement Association, USA.
    Nawy, Edward G, (1996), Reinforce Concrete – A Fundamental Approach, 3rd ed., PrenticeHall, Inc.,New Jersey, USA.
    MacGregor, James G., (1997) Reinforce Concrete – Mechanics and Design, 3rd ed.,- Prentice
    Hall Inc., New Jersey, USA.
    Bowles, Joseph E., (1996), Foundation Analysis and Design, 5th ed., McGraw-Hill Companies,
    Inc., USA
    SAP 2000 Nonlinear-linear.